Users Guide

1. From the desktop menu, click System Setup, and then click Network Setup.

The Network Setup dialog box is displayed.

2. Click the General tab, and use the following guidelines:

a) To set the default gateway, select the type of network interface from the available options.

1. Single Network support — Either wireless or wired network is connected.

• ENET — Click this option, if you want set up the Ethernet Wired Network Connection.

• WLAN — Click this option, if you want to set up the Wireless Network Connection.

• If you use wireless network after selecting ENET connection or wired network after selecting WLAN connection, then the

system log "WLAN: set default gate way xxx.xxx.xxx.xxx" for first case and "ENET: set default gate way xxx.xxx.xxx.xxx"

for second case are printed to ensure that the UI setting reflects the actual usage.

NOTE: The User Interface (UI) will not be changed automatically.

2. Dual Network support — Both wireless and wired networks are connected. The default gateway is determined by the UI

settings.

b) Enter the URL address of the DNS domain in the DNS Domain box.

c) Enter the IP address of the DNS server in the DNS Server box.

Use of DNS is optional. DNS allows you to specify remote systems by their host names rather than IP addresses. If a specific IP

address (instead of a name) is entered for a connection, it is used to make the connection. Enter the DNS domain and the network

address of an available DNS server. The function of the DNS domain entry is to provide a default suffix to be used in name

resolution. The values for these two boxes may be supplied by a DHCP server. If the DHCP server supplies these values, they

replace any locally configured values. If the DHCP server does not supply these values, the locally configured values will be used.

NOTE:

You can enter up to 16 DNS server addresses, separated by a semicolon, comma, or space. The first

address is for the primary DNS server and the rest are secondary DNS servers or backup DNS servers .

d) Enter the IP address of the WINS server in the WINS Server box.

Wyse 3040 thin client on ThinOS