Reference Guide

Option Parameter
You can enable the ping using Ping parameter. For non-published
application connections, a ping (ICMP) is sent to the host server
prior to connect, to verify that the host is reachable.
Port=<port number> Default is 443. Specifies a different port number other than
default 443 for SSL connection.
Protocol={PCOIP, RDP, Blast} Default is PCoIP.
Specifies the protocol to use.
Reconnect={no, yes} Default is no.
Reconnect option is used to automatically reconnect to an
application server after a disconnection.
ReconnectSeconds=<value in seconds> Default is 30.
Specifies the amount of time in seconds (default is 30) to wait
before automatic reconnection to an application server after a
disconnection. Reconnect=yes is required.
SecureMode={neverconnect, warnbefore, donotverify} Default is warnbefore.
Specifies how to control the connection security mode
preferences.
Value and Description:
neverconnect — Never connect to untrusted servers.
warnbefore — Warn before connecting to untrusted servers.
ShareRemovableStorage={yes, no}
Specifies whether or not to allow access to removable storage
devices.
Set the value to yes if you want to permit access to use removable
storage devices.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW,
$TN}
Specifies the name required to log in to the application server.
Either a conventional login name or a variable can be used.
Variable and Description:
username — Conventional login name
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
UsbAutoConnectOnInsert= {yes, no}
Specifies whether the USB should be automatically connected in
session on inserting the USB. Default is yes.
UsbAutoConnectAtStartup= {yes, no} Specifies whether the USB should be automatically connected in
session on Session Startup. Default is yes.
sslCipherString This parameter configures the cipher list to restrict the use of
certain cryptographic algorithms before establishing an encrypted
SSL connection. The default value for Horizon Client 3.5 and
46 Connect Parameter Options