Reference Guide

Options Description
UseRDGateway={yes,no} Default is yes.
UseRDGateway option is used to enable RD gateway.
Username={<username>, $SN, $MAC, $IP, $DN, $UN, $PW,
$TN}
Default is none.
Specifies the name required to log in to the RDP server.
Either a conventional login name or a variable can be used. Variable
and Description:
username — Conventional log-in name
$SN — Serial number used
$MAC — MAC address used
$IP — IP Address used
$DN — Sign-on domain name
$UN — Sign-on name used
$PW — Sign-on password used
$TN — Terminal name
Smartcard={no, yes}
Default is no.
Yes/no option is used to enable Smart Card Authentication.
Speed_level={Broadband/LAN/Modem/Custom} Default value is LAN.
Handles the performance based on bandwidth.
SSH Connect Options
The following table contains the supported options you can use for SSH connections where defaults values are in bold:
Example:
CONNECT=SSH \
Description="SSH_Connection" \
Host=192.168.1.2 \
Reconnect=yes \
ReconnectSeconds=100 \
Username=root \
Command=/usr/X11R6/bin/xterm\ \
LocalCopy=no
Table 11. SSH Connect Parameter Options
Option Description
AutoConnect={no, yes} Default is no
AutoConnect option is used to start a connection automatically at
sign-on.
Command=<command > Default is none
Specifies a command to execute remotely. For xterms, it is
recommended that the -ls option be used, because it is a login shell
42 Connect Parameter Options