Reference Guide

Options Description
EnableH264={yes,no} Default is Yes.
NOTE: Use this option when connecting to a server with
data encryption between the communication of the
server and the client.
EnableUDP={Yes,No} Default is Yes.
ForwardPrinters={yes, no} Default is yes.
Yes/no option to enable the forwarding and use of all available
printers to or with the RDP session. Any direct RDP connection is
supported (not supported through VMware View broker).
FullScreen={no, yes} Default is no
Runs the session at full screen.
Host=<host server name or IP address> Specifies the server name or IP address to connect.
NOTE: This option is mandatory.
Icon=<bitmap file> Specifies an icon to appear on the thin client desktop for this
connection. The file must be an XPM file located in the FTP server
wlx2/bitmap directory. If not specified, the default icon is
displayed.
LocalCopy={no, yes} Default is no
The LocalCopy option is used to save this connection in the local
permanent registry.
LowBand={no, yes} Default is no
LPTports=LPTx={LPTy,USBLPz},LPTx=... It maps parallel devices on the server to make devices parallel on
the thin client, where x=1 to 4; if LPTy, map to that parallel port on
the thin client; if USBLPz, map to that USB parallel port.
NOTE: Make sure each serial device command is
separated by a comma and space, and Windows 2000
servers do not support LPT port mapping.
NLA={yes,no} Default is no.
NLA option is used to enable Network Level Authentication for
RDP sessions.
NotifyDisconnect={yes,no} Default is no.
It Notifies the Disconnection.
NoGrabKeyboard={no, yes} Default is no.
NoGrabKeyboard option is used to enable the keyboard event
grabbing in any direct RDP connection session (not supported
through VMware View broker).
Password={<base-64 encodedpassword>, $SN, $MAC, $IP, $DN,
$UN, $PW, $TN}
Specifies the password required to log in to the application server.
Either a base-64 encoded log-in password or a variable can be
used.
password — base-64 encoded log-in
password Variable and Description:
$SN — Serial number
40 Connect Parameter Options