Reference Guide

Options Description
Enable this parameter for a specific connection if the setting
parameter pertaining to that connection needs be stored in the
registry permanently, if enabled the settings parameter will be
stored across system reboot.
LowBand={yes, no} Default is no.
To enable optimization for low-speed connections, such as
reducing audio quality or decreasing protocol-specific cache size.
NoReducer={yes, no} Default is yes.
You can enable or disable the compression during the session.
Password={base-64 encoded password string , $SN, $MAC, $IP,
$DN, $UN, $PW, $TN}
Specifies the password required to log in to the application server.
Either a base-64 encoded login password or a variable can be used.
password — base-64 encoded login password
Variable and Description:
$SN — Serial number
$MAC — MAC address
$IP — IP Address
$DN — Sign-on domain name
$UN — Sign-on name
$PW — Sign-on password
$TN — Terminal name
NOTE: The application server password is not
encrypted. The user is prompted to enter the password
when the connection is made. This application server
password directive never starts a line, so it can be
distinguished from the thin client user sign-on password
which starts a line.
Ping={yes, no} Default is yes.
This option is used to enable ping. For non published application
connections, a ping (ICMP) is sent to the host server prior for
connecting, to verify that the host is reachable.
Reconnect={ no, yes, value of 1 to 3600} Default is no.
It controls the automatic reconnection to an application server
after a disconnection.
Option Value and action:
yes — Immediately restarts the connection in 30 seconds after a
disconnect. Default for reconnect is 30 seconds.
no — (default) Does not reconnect after a disconnect.
1...3600 — (integer) Specifies the interval to wait in seconds
before automatically restarting the connection after a
disconnection. Valid range is 1–3600.
Resolution={ default, seamless, 640x480, 800x600, 1024x768,
1280x1024, 1600x1200}
Default is default, which starts the connection using the current
desktop display setting.
Specifies the connection display resolution. The default value starts
the connection using the current desktop display setting.
Connect Parameter Options 37