Reference Guide

Parameter Description
1000 - slowest
NetworkPrinter= < LPD> For Example: NetworkPrinter=LPD <Option>
For parameter options used in the command line, see NetworkPrinter
in Printer Parameters Options.
Keyboard.Repeat={true, false} Default is true. Keyboard repeat is enabled. If you press key, it will be
repeated.
Keyboard.RepeatDelay={<default>, 0 to 7 or 100 to 2000} Initial Key Repeat Delay is 100 to 2000 according to new SLES standard.
For backward compatibility 0 is minimum 7 is maximum. This setting is
valid only when Keyboard.Repeat is enabled (true).
Keyboard.RepeatRate={<default>, 0 to 2 or 9 to 2000} 9 is fast and 2000 is slowest according to new SLES standard. For
backward compatibility Key Repeat Interval, delay between repeats.
0 is slow
1 is medium
2 is fast
This setting is valid only when Keyboard.Repeat is enabled (true).
Keyboard.layouts=<value of Keyboard.layouts> For example: Keyboard.layouts= fr (for french)
Printer={USB <options> or URI} Specifies the USB for local USB printer. Only one USB printer can be
supported. The USB printer will not be configured if it is not attached.
For other types of printers, URI needs to be provided, such as
parallel:/dev/lpunit or serial:/dev/ttySunit?baud=speed.
For parameter options used in the command line, see Printer in
Printer Parameters Options.
PrinterURI=<uri> For Example:
PrinterURI=[ipp://[user[:password]@host[:port]/path
[http://[user[:password]@host[:port]/path
[socket://host[:port]
[lpd://host/queue
[smb://[user[:password]@[workgroup/]
server[:port]/sharename
[usb:/dev/usb/lpunit
[parallel:/dev/lpunit [serial:/dev/ttySunit?baud=speed <Option>
SMBPrinter=<host address>
For Example:
SMBPrinter=<host address>
[username=<username>] [password=<base64-encoded password>]
[domain=<Windows domain>] <options>
For parameter options used in the command line, See SMBPrinter in
Printer Parameters Options.
Usb_Boot_Support=[Enable\Disable]
BIOS_Password=<password>
This parameter allows you to enable or disable the USB boot support
and same setting is displayed in the BIOS setup menu in Settings &
System. The current BIOS password is required to make the changes.
18 Peripheral Settings Parameter Options