Reference Guide

Parameter Description
NOTE: If root path is not provided, /wyse is the
default. The directory name /wlx2 is appended to the root
path entry before use, if /wlx2 folder is not available
then /wlx will be the fall back default.
SaveMultiMonitorPref={yes, no} This parameter allows you to save the position of a desktop session,
and then relaunch it in the same position.
SCEPCLIENTCERTSETTINGS=CertName=<Certname> \
URL=https://<FQDN>/certsrv/mscep/mscep.dll \
ChallengePassword=<challenge password> \
CADN=<FQDN domain name> \
AutoEnroll=Yes
This parameter allows deployment of certificates with SCEP HTTPS
protocol.
If the 802.1x authentication is enabled, the User or Machine
certificates obtained from SCEP server from SSL or plain http
connect can be verified.
SshIdleTimeout=<integer 1 to 60> Default is 0, which is disabled. Set the SSH connection idle timeout
in minutes. when the client idle timeout reaches, SSH connection will
be terminated automatically from SSH Server. This works only if SSH
is enabled.
ServerBusyCounter=<1 – 24> Default is 5.
The number of retries when server is busy. There is no hard limit
enforced as this was designed as adhoc measure till wdm server
provides the counter value during checkin.
ServerBusyTimeout=<byte 10 – 360> Default is 30
The interval before Hagent goes for retry. There is no hard limit
enforced as this was designed as adhoc measure till wdm server
provides the timeout value during checkin.
System.Language=<string>
System.Language={en_US, fr_FR, es_ES, de_DE, nl_NL, pt_PT,
zh_CN, ko_KR, ja_JP}
System.Language — The value specifies the UI language and the
locality where it will be used. For example, System.Language =
en_US.
System.Language – Default is en_US. It specifies only one
language in INI.
NOTE:
Do not specify any encoding.
TimeFormat=<String> Default is 12h
Specifies the system time format.
The following are the formats:
• 24, 24h, 24-hour, 24-hour format.
• 12, 12h, 12-hour, 12-hour format.
VNCServer.DisableVNC={yes, no} Default is yes
You can disable or enable the VNC Server.
VNCServer.UsePasswd={yes, no} Default is no
You can use password to authenticate VNC connections.
VNCServer.VncPasswd=<string> This parameter is used to set the new VNC password from default.
Maximum length is 8 characters. If the VncPassword is not set, then
default password is Wyse.
14 General Settings Parameter Options