Reference Guide

Parameter Description
It is the password used when importing the configurations file from
an FTP server.
MerlinUpdate.Username=<string> The username used to login the server.
MerlinUpdate.Password=<string> Default is base-64 encryption. The password is used to login the
server.
MerlinUpdate.URL=<string> The URL to the Merlin base. Macro $PLATFORM is automatically
appended for Merlin imaging.
MicMute={yes, no} Default is no
If MicMute is set to yes, then it mutes the microphone volume.
MicVolume=<0-100> Determines the microphone volume level.
MgmtDiscoveryMethod= {SRV, HOSTNAME, CNAME, STATIC,
ALL, DHCP }
Default is ALL .
The Discovery method used for finding WDM server.
NTP.Enable={yes, no} Default is no.
It Specifies that the NTP daemon should be enabled and started.
NOTE: NTP server will not be started if an
NTP.TimeServer parameter is not specified and the thin
client does not have one previously set.
NTP.TimeServer=<NTP Server IP or FQDN> [;<NTP Server IP or
FQDN>;....}
Default is None.
It specifies one or more NTP server IP Addresses or FQDNs.
PermitSshRootLogin={yes, no} Default is no, It used to prohibit the root SSH login. You can enable
or disable the root login through SSH. It works only if SSH is enabled.
PowerButtonAction ={interactive, reboot, restart, halt,
shutdown, none, nothing}
Default is interactive
It specifies system behavior when the power button is pressed.
none or nothing: Power button is ignored, that is no action.
Interactive: An optional window is presented to you.
halt or shutdown: Shuts down the devices.
reboot or restart: Reboots the devices.
ProgressUpdateInterval=<10–60> Default is 20
The interval specified for sending image upgrade status to WDM
server. Value less than 10 will be rounded to 10 and Value greater
than 60 will be rounded to 60.
PasswordEncryptionCode={0, 1, 2} Default value is 1
Specifies the desired password encryption algorithm in INI. This
parameter must be place at least before the first password used in
the wlx.ini file.
0: Plain Text
1: Base64 encoded
2: AES encoded
RootPath=<string> Default is /wyse
This path is used to access INI files on the server.
General Settings Parameter Options 13