Users Guide

Displays

This section provides information about the multiple monitor congurations.

Multiple monitor congurations

Wyse 3030 LT thin clients running ThinOS

Depending on your thin client model, connections to monitors can be made using either a DisplayPort, or a proper Dell monitor cables/

splitters/adapters.

For information about conguring dual head display settings, see Conguring the Dual Head display setting on ThinOS.

Wyse 3030 LT thin clients running ThinLinux.

In a Dual-monitor conguration, if both monitors are connected, then by default, the monitors are in span mode. The primary monitor is on

the left (monitor 1) and the secondary monitor is on the right (monitor 2). The resolutions of the monitors are auto detected by the system

by analyzing the monitor’s capabilities.

For information about conguring dual head display settings, see Customizing your display on ThinLinux.

Conguring dual Head display settings on Wyse ThinOS

To congure the Dual head display settings:

1 From the desktop menu, click System Setup, and then click Display.

The Display dialog box is displayed.

2 Click Dual Head tab, and use the following guidelines:

6 Displays