Users Guide

g Enable LPD service for the printer—Select this to make the thin client an LPD (Line Printer Daemon) network print server for
LPR printing requests from the network.
If the thin client is to be used as an LPD printer server, DHCP must not be used and a static IP address must be assigned to the
thin client as described in network settings.
3 Click OK to save the settings.
Using the printer setup options
To congure the printer setup options:
1 From the desktop menu, click System Setup, and then click Printer.
The Printer Setup dialog box is displayed.
2 Click the Options tab, and do the following:
a Default Printer —From the list of available printers, select the printer that you want to be default printer.
b Enable .print Client and Port —If you want to enable .print Client, select Enable print Client , and then enter the port name.
3 Click OK to save the settings.
Conguring connections locally on ThinLinux
On the System Settings page, click the Connections icon. The Connections page contains the following tabs:
• Citrix
• VMware
NOTE
: The description names for all the connections can not be edited once you create the connection.
Conguring and managing Citrix connections
The Citrix Connections page enables you to create and manage the Citrix connections both locally and globally.
Figure 4. Citrix connection settings
To congure the local Citrix settings:
1 Click the + icon to add a new Citrix Connection.
32
Software