Administrator Guide
Figure 58. Ericom PowerTerm Login Settings
Table 20. Ericom PowerTerm Login Settings
Parameter Description
Connection type On the Connection Type page, click the Network or Serial Port
radio button depending upon the requirement. By default, the
Network option is selected. Serial Port radio button is disabled if
the application does not detect any active serial ports.
Host Enter the Ericom server host’s IP or FQDN address in the Host
eld. This eld is hidden, if the connection is through Serial Port.
Port Specify the port number used to connect the Ericom server in
the Port eld. This is available if the connection is through the
network. In case of Serial Port, this eld displays as COM port
and the available serial ports are listed in the drop-down list.
Terminal type Select the terminal type to be emulated from the drop-down list
in the Terminal Type eld.
Terminal name Type the name of the Ericom PowerTerm terminal window in the
Terminal Name eld
Script le to run on logon Specify the path of the script le (if any) to be executed in the
remote system in the Script le to run on Logon eld.
76 Conguring Connections locally