Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
If EnableImprivataVC is set to no, the Imprivata Virtual Channel is
disabled. The user can use vusb redirect instead of Imprivata Virtual
Channel mode to use the Rfideas or finger print device in session as
server side remote device.
Set Locale=LocaleID to set Locale in session to make some
localization configuration to work. )
Set SessionLogoffTimeout to force all sessions to logoff after
you sign-off from the broker. It only supports Citrix Xen brokers.
Without this INI, all sessions are simply disconnected after you sign-
off from the broker. The default value is 0. So when you log off
from the broker, we used to disconnect all active sessions. Now
the system will also force those sessions to be logged off, so that
next time you can have a clean session. From this release, when
this INI value is not 0, for example 30, and when you sign off
from broker with active sessions, client sends sign-off command
to active sessions instead of asking disconnect, and client waits
for 30 seconds, if all active sessions successfully log off within 30
seconds, for example finish by 20 seconds, system will sign out
users from broker immediately after that. If any active sessions fail
to log off within 30 seconds, system will close the session and sign
out users from broker immediately. During the awaiting time, system
will prompt user a message to ask them to check and save all work
to make the session log off smoothly.
Set GroupSession=yes to enable the function of grouping sessions
and the menu item of Group Sessions is checked when you right
click on the desktop. The default value is no and the original state of
Group Sessions is unchecked.
**SessionConfig=ICA
[desktopmode={fullscreen, window}]
[mapdisksunderz]: DISCONTINUED. DO NOT USE.
[TosIpPrecedence={0–5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7
/AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/
AF42/AF43/EF}]
[DiskMapTo=a character sequence]
[SysMenu={remote,
local}]
[SessionReliability={
no, yes}]
[WarnPopup={yes, no}]
[ondesktop={
no, yes, all, none, desktops, applications,
ondesktop_list}]
[AudioQuality={default, high, medium, low}]
[USBRedirection={TCX, ICA|HDX}]
[ZLKeyboardMode={0, 1, 2}]
[ZLMouseMode={0, 1, 2}]
[SucConnTimeout=seconds]
[HDXFlashUseFlashRemoting={Never,Always}]
[HDXFlashEnableServerSideContentFetching={Disabled,
Enabled}]
[EnableRTME={Yes, No}]
SessionConfig — Specifies the ICA default settings of the optional
connection parameters for all ICA sessions.
desktopmode — Default is fullscreen. Specifies the display mode
of an ICA published desktop when using an ICA PNAgent logon; the
default is fullscreen mode for a PNA desktop application.
mapdisksunderz — DISCONTINUED. DO NOT USE.
TosIpPrecedence — Allows you to set IP Precedence in the TOS
fields.
TosDscp — Sets IP DSCP in the TOS fields.
DiskMapTo — Specifies to map disks to a character sequence.
NOTE:
A sequence of characters can be used by DiskMapTo, with each
letter mapped to one disk in order. For example, if RTNM is the
sequence, R is mapped to the first disk (in ThinOS, it will be
D:/), T is mapped to the second disk (in ThinOS, it will be E:/),
and so on. Only the letters “a” through “y” and “A” through “Y”
are accepted; All lowercase letters are changed to uppercase,
other characters will be skipped, and duplicate characters will be
omitted.
For example, #GGefZzedAF1JaE will be mapped to GEFDAJ.
The number of disks mapped to the session depends on the
number of valid letters provided. If no letter is provided, all disks
will be mapped to the session using default driver letters.
SysMenu — Default is local. Specifies the system menu mode
when right-clicking the taskbar button of a seamless window. If
206
Creating and Using xen.ini Files