Administrator Guide

Table 22. Parameters for a xen.ini File (continued)
Parameter Description
Layout — Default is stretch. Specifies the arrangement on the
desktop background of the bitmap file specified by the Desktop
parameter, if auto dial-up is set, Layout is invalid.
● For center, the image is placed in the center of the desktop
without image size change.
● For tile, the image is replicated across the desktop.
● For stretch, the image is modified to fill the desktop.
NOTE:
In dual-monitor mode, the wallpaper is replicated and specified
separately for each monitor, instead of being shared by the two
monitors.
IconTextColor — Specifies the icon text color in RGB string
format, must be enclosed in quotes, where rrr, ggg and bbb are
decimal numbers in the range of 0 to 255.
DesktopColorDepth={16, 32} Default is 32.
DesktopColorDepth — Sets the desktop color to 16 or 32 bits.
Device=audio
volume={low, middle, high} or {0 to 25}
mute={
0, 1, 2, 3}
[mic_vol={high, middle, low} or {0-25}]
[mic_mute={yes, no}]
[mic_boost={yes, no, 1, 2, 3, 4}]
[min_cache={
1-50}]
[EnableSpeaker={yes, no}][
[playback={device name string}]
[record={device name string}]
[mic_gain_device={device name string}]
[mic_gain={1~8}]
[DPaudio={yes, no}]
[local_button={yes, no}]
[jack_popup={yes, no}]
Specifies the local thin client audio volume.
volume — Default is middle. Specifies the volume level.
high — maximum volume
middle — medium volume
low — minimum volume
Values of 0-25 provide more exact volume level
mute — Default is 0. Option to enable/disable mute.
0 — no mute
1 — mutes audio
2 — mutes audio and system beep
3 — mutes system beep
mic_vol — Default is medium. Option to set volume levels to high,
middle or low.
high — maximum volume
middle — medium volume
low — minimum volume
Values of 0-25 provide more exact volume level.
mic_mute — Default is no.
no — no mute
yes — mutes audio
mic_ boost — This option increases the mic decibels.
min_cache — Default is 1. This option is for configuring ThinOS
audio playback minimum buffering amount in ten millisecond units.
This can be used when network bandwidth is not large enough to
play audio smoothly.
In such cases, set min_cache higher, so that ThinOS will buffer
more audio data before playing the audio.
Creating and Using xen.ini Files
171