Administrator Guide
NOTE: Set the INI EnableLocal=yes to show the Default ICA icon in connect manager.
1 Go to Home icon > Connect Manager > Default ICA > Edit.
2 Click the Connection tab, and use the following guidelines:
Figure 57. Default ICA
a Server or Published Application—Select the type of connection to which the settings apply.
b Connection Description—Enter the descriptive name that is to be displayed in the connection list (38 characters maximum).
c Browser Servers—Enter a delimited (comma or semicolon) list of IP addresses or DNS-registered names of ICA servers that
contain the master browsers list, or that can direct to another server that contains the list.
The master browsers list is generated automatically by a browsing program on one of the ICA servers that are selected by
negotiation between servers. It is used to provide the information that is displayed in the Server Name or IP box. No entry is
needed if the list is on an ICA server in the same network segment as the zero client. No entry is necessary if the connection is
to a server, or if the server name or IP contains the IP address of the server.
d Host Name or Application Name (title depends on the Server or Published Application option that is selected)—You can enter
a delimited semicolon or comma-separated list of server host names or IP addresses, or you can select from the list of ICA
servers or published applications that are obtained from the ICA master browser. You can also use Browse next to the box to
make the selection you want.
84
Conguring the connection broker