Administrator Guide
Figure 48. Broker setup
2 Select the StoreFront Style check box to enable the StoreFront style.
3 Broker Server— Enter the IP address / Hostname / FQDN of the broker server.
4 Select the Enable automatic reconnection at logon check box to enable automatic re-connection at logon.
NOTE
: If you enable the automatic re-connection, you are able to select from the re-connection options. Click either of
the options where you can connect to disconnected sessions only or both active and disconnected sessions.
5 Select the Enable automatic reconnection from the button menu check box to enable automatic reconnection from the button
menu. You can select any of the following options:
• Connect to disconnected sessions only.
• Connect to active and disconnected sessions.
6 Account Self-Service Server— Enter the IP address of the Account Self-service Server.
7 XenApp — Use this option if you want to set default settings to XenApp.
8 XenDesktop— Use this option if you want to set default settings as XenDesktop.
9 Click OK to save the settings.
Citrix HDX RealTime Multimedia Engine—RTME
RTME 1.8 was a new feature introduced in ThinOS Lite 2.2. This is the Citrix HDX RealTime Optimization Pack 1.8 for Lync. In ThinOS Lite
2.3 release, the Citrix HDX RealTime Optimization Pack 2.0 (RTME 2.0) is supported. Citrix RTME 2.0 is introduced to support Microsoft
Skype for Business 2015 client/UI (only), in addition to RTME 1.8 supporting the Microsoft Lync 2010/2013 clients. From ThinOS Lite 2.4
release, RTME version is updated to a newer version 2.2– Citrix HDX RealTime Optimization Pack 2.2 for Microsoft Skype for Business
Conguring
the connection broker 73