Administrator Guide
Figure 12. Broker setup
2 Select the StoreFront Style check box to enable the StoreFront style.
3 Broker Server— Enter the IP address / Hostname / FQDN of the broker server.
4 Select the Enable automatic reconnection at logon check box to enable automatic re-connection at logon.
NOTE
: If you enable the automatic re-connection, you are able to select from the re-connection options. Click either of
the options where you can connect to disconnected sessions only or both active and disconnected sessions.
5 Select the Enable automatic reconnection from the button menu check box to enable automatic reconnection from the button
menu. You can select any of the following options:
• Connect to disconnected sessions only.
• Connect to active and disconnected sessions.
6 Account Self-Service Server— Enter the IP address of the Account Self-service Server.
7 XenApp — Use this option if you want to set default settings to XenApp.
8 XenDesktop— Use this option if you want to set default settings as XenDesktop.
9 Click OK to save the settings.
Conguring the visual settings
To congure the visual settings:
1 From the oating bar menu, click the System Setup , and then click Remote Connections.
The Remote Connections dialog box is displayed.
2 Click Visual Experience tab and use the following guidelines:
40
Conguring the connectivity