Administrator Guide
is used to make the connection. These entries can be supplied through DHCP, if DHCP is used. DNS and WINS provide
essentially the same function, name resolution. If both DNS and WINS are available, the zero client attempts to resolve the name
using DNS rst and then WINS.
You can enter two WINS Server addresses (primary and secondary), separated by a semicolon, comma, or space.
e Enter the digit multiplier of 30 seconds in the TCP Timeout box to set the timeout value of a TCP connection. The value must
be 1 or 2 which means the connection timeout value is from 1x30= 30 seconds to 2x30= 60 seconds. If the data for connecting
to the server is not acknowledged and the connection is time out, setting the timeout period retransmits the sent data and again
tries to connect to the server till the connection is established.
3 Click OK to save the settings.
Conguring the DHCP options settings
To congure the Option settings :
1 From the oating bar menu, click the System Setup , and then click Network Setup.
The Network Setup dialog box is displayed.
2 Click the Options tab, and use the following guidelines:
Figure 8. Network Setup
a DHCP Option IDs — Enter the supported DHCP options; each value can only be used once and must be between 128 and
254). For information on DHCP options, see Using DHCP options
Conguring
the connectivity 31