Administrator Guide

Using Your Zero Client as a Print Server—LPD
A ThinOS Lite zero client can be congured as a basic network print server, to share local printers with other zero clients.
Using the Printer Setup Dialog Box for Conguring LPD
Services
A zero client can be congured to provide LPD (Line Printer Daemon) services making the zero client a printer server on the network. Set
up the zero client that is to provide LPD print services as follows:
To congure LPD Services using the Printer Setup Dialog Box :
1 From the oating bar menu, click System Setup > Network Setup to open the Network Setup dialog box.
2 Enter a static IP address for the zero client.
3 From the oating bar menu, click System Setup > Printer to open the Printer Setup dialog box and select any of the listed ports.
4 Select LPT.
5 Name the printer in the Printer Name box.
6 Enter the Printer Identication type or model of the printer in the exact text of the Windows printer driver name — including
capitalizations and spaces. In our example case, enter HP LaserJet 4000 Series PCL.
7 You can leave Printer Class as default.
8 Select Enable the Printer Device.
9 Select Enable LPD service for the printer.
10 For Setting Up Windows 2003/2008 Servers, see Setting Up Windows 2003/2008 Servers.
Setting Up Windows 2003 or 2008 Servers
To Congure Setting the Windows 2003/2008 Servers :
1 Navigate to Control Panel > Administrative Tools > Services and ensure the Microsoft TCP/IP Printing service is installed. If it is not,
install it using the Microsoft installation instructions.
2 Add the zero client as the LPD printer by completing the following:
a Navigate to Control Panel > Printers > Add Printers > Local Printer > Create a new port and select LPR PORT.
NOTE
: If you do not see LPR Port, ensure that the Microsoft TCP/IP Printing service is installed correctly.
b Type the zero client IP address or DNS name in the Name or address of host providing LPD box.
c Type the printer name assigned in Using the Printer Setup Dialog Box for Conguring LPD Services in the Name of printer on
that machine box.
d Click OK, and then click NEXT.
3 After you have selected the printer, you can perform your normal printer setup for the application server. For example, select the
manufacturer printer type and printer name.
Using INI Parameters for Conguring LPD Services
Conguring LPD printing using ThinOS Lite INI parameters is simple and an easy way to congure a ThinOS Lite zero client to be a basic
network print server, to share local printers with other zero clients.
Your INI parameters will look something like the following:
Printer=LPT1 \
Name="HP LaserJet 4000" \
Examples of Common Printing
Congurations 245