Administrator Guide
Parameter Description
WINSServer=<server_list>
Species the WINS server address. The WINSserver is an IP list
separated by ";" or ",", with a maximum list size of 2.
Connect Parameter: Options
This topic provides the supported options for the Connect parameter in ICA supported connections.
ICA connect options
Table shown here contains the supported options used for ICA connections (after you use the Connect=ICA parameter/selection).
IMPORTANT:
If an option has an underlined value (default), that option and default value will automatically be used with Connect=ICA; options
without underlined values can also be used if you want to, but are not automatically used with Connect=ICA. In addition, when using
options, you can leave the default value or change it to another value shown.
For example, in the following case where:
Connect=ICA
[Option1={0, 1}]
[Option2={1, 2, 3, 4}]
Since you are using Connect=ICA, then Option 1 and its default value 0 will automatically be used as Option 1 has an underlined value
(default of 0). You can still use Option 2 if you want to, however, Option 2 is not automatically used with the parameter as Option 2
does not have a default value.
NOTE:
Any option in ICA Connect Options that is used in a {username}.ini le will return to the default value set for that option in the wnos.ini
le after a user sign-o. For example, if your {username}.ini le contains the option Reconnect=yes so that a lost connection will
restart 20 seconds after disconnection; and you sign o the thin client, then the Reconnect value will return to the original default
value of no (Reconnect=no) contained in the wnos.ini le—so that others who sign in can use their own user prole; assuming the
administrator has not changed the default values in the wnos.ini.
ICA connect: options
Table 23. ICA connect: options
Option Description
Alternate=[no, yes] Default is no.
Yes/no option to use an alternate IP address returned from an ICA
master browser to get through rewalls.
AudioQualityMode={0, 1, 2, 3} Default is 0.
Species the audio quality of a session.
0 – Default
1 – High Quality
230 Creating and Using xen.ini Files