Administrator Guide

Parameter Description
DisableReceiverLogo—Hides the CitrixReceiver logo in left top corner in
storefront style. The default value is No.
MMRClientFetchDisabled — This option disables RAVE client content
fetching. The default value is No.
SessionCong=ICA
KeyboardTimer=1000
This is a Citrix INI. This species the amount of time, in milliseconds, the
client queues keystrokes before passing them to the server.
Shutdown={standby, turno}
Default is standby.
Species the system state when shutting down the unit. If set to standby,
the ThinOS Lite system is suspended. When the unit starts up, it is
resumed. It does not go to the BIOS and thus turns on quickly.
If set to turno, the system is turned o. When the unit starts up, it rst
starts the BIOS then ThinOS Lite.
SignOn={yes,no, NTLM}
[MaxConnect=max]
[ConnectionManager={maximize, minimize, hide}]
[EnableOK={no, yes}]
[DisableGuest={no, yes}]
[DisablePassword={no, yes}]
[LastUserName={no, yes}]
[RequireSmartCard={no, yes}]
[SCRemovalBehavior= {-1, 0, 1}]
[SaveLastDomainUser={yes, no, user, domain}]
[DefaultINI=lename]
[IconGroupStyle={default, folder}]
[IconGroupLayout={Vertical, Horizontal}]
[PasswordVariables={yes, no}
[LockTerminal={yes, no}]
[ExpireTime={0, 1 - 480}]
[UnlockRefresh={yes, no}]
[SCShowCNName={yes,no}]
[SCSecurePINEntry={no, yes}]
[AutoConnectTimeout={10-300}]
[DisableEditDomain={yes, no}]
[AdGroupPrex=adgrpnameprex]
Yes/no option to enable the sign-on process. Default is yes. If set to
NTLM, user can be authenticated with NTLM protocol.
The user must be a domain user and the same sign-on user credentials
must be available in the ftp://~/xen/ini/ directory.
The optional keyword MaxConnect sets the maximum number of
connects that are allowed to be specied in the xen.ini and username.ini
together. The range allowed for the “max” is 100 to 2000. If the value is
greater than 2000, 2000 is set instead. If the value is lesser than 100, 100
is set instead.
The default maximum value is 216 entries. (CIR37285)
The optional keyword ConnectionManager sets the state of connection
manager while sign on (After 5.0.006).
The following optional keywords are valid after 5.0.010.
The optional keyword EnableOK is set to display OK and Cancel button in
sign-on window
The optional keyword AutoConnectTimeout sets the timeout for auto
connect published applications. The range is 10 seconds to 300 seconds.
The default is 30 seconds
The optional keyword DisableGuest sets whether guest sign-on is disabled
or not.
The optional keyword DisablePassword is set to disable password box and
new password check box in sign-on window.
The optional keyword LastUserName is set to display the last sign-on
username after the user logs o.
The optional keyword RequireSmartCard is set to enable force logon with
smartcard
The optional keyword SaveLastDomainUser is set to save the username
and domain into NVRAM, after successful sign on. So during the next
reboot, the username and domain saved in the NVRAM is displayed in
sign on server as default username and domain, if no Default User is set in
xen.ini.
Creating and Using xen.ini Files
221