Administrator Guide

Parameter Description
[mapdisksunderz]: DISCONTINUED. DO NOT USE.
[TosIpPrecedence={0–5}]
[TosDscp={Default/CS1/CS2/CS3/CS4/CS5/CS6/CS7/
AF11/AF12/AF13/AF22/AF23/AF31/AF32/AF33/AF42/
AF43/EF}]
[DiskMapTo=a character sequence]
[SysMenu={remote, local}]
[SessionReliability={no, yes}]
[WarnPopup={yes, no}]
[ondesktop={no, yes, all, none, desktops, applications,
ondesktop_list}]
[AudioQuality={default, high, medium, low}]
[USBRedirection={TCX, ICA|HDX}]
[ZLKeyboardMode={0, 1, 2}]
[ZLMouseMode={0, 1, 2}]
[SucConnTimeout=seconds]
[HDXFlashUseFlashRemoting={Never,Always}]
[HDXFlashEnableServerSideContentFetching={Disabled,Ena
bled}]
[EnableRTME={Yes, No}]
[FlipByTimer={0, 1}]
[RefreshTimeOut={dd:hh:mm}]
[Timeout={Yes, No}]
[PasswordExpireNotify={yes, no}]
[RefreshPopupNotice={yes, no}]
[DisableReceiverLogo={Yes, No}]
[MMRClientFetchDisabled={Yes, No}]
desktopmode
— Default is fullscreen. Species the display mode of an
ICA published desktop when using an ICA PNAgent logon; the default is
fullscreen mode for a PNA desktop application.
mapdisksunderz — DISCONTINUED. DO NOT USE.
TosIpPrecedence — Allows you to set IP Precedence in the TOS elds.
TosDscp — Sets IP DSCP in the TOS elds.
DiskMapTo — Species to map disks to a character sequence.
NOTE:
A sequence of characters can be used by DiskMapTo, with each
letter mapped to one disk in order. For example, if RTNM is the
sequence, R is mapped to the rst disk (in ThinOS, it will be D:/), T
is mapped to the second disk (in ThinOS, it will be E:/), and so on.
Only the letters “a” through “y” and “A” through “Y” are accepted;
All lowercase letters are changed to uppercase, other characters
will be skipped, and duplicate characters will be omitted.
For example, #GGefZzedAF1JaE will be mapped to GEFDAJ. The
number of disks mapped to the session depends on the number of
valid letters provided. If no letter is provided, all disks will be
mapped to the session using default driver letters.
SysMenu — Default is local. Species the system menu mode when
right-clicking the taskbar button of a seamless window. If it is remote, the
system menu will come from the remote server; otherwise, it will be the
local menu.
SessionReliability — Default is no. Yes/no option to enable session
reliability.
WarnPopup— If WarnPopup=no, the option can disable the warning
message when session reliability happens in order to decrease the
administrative support calls.
ondesktop— This option species the connections that are displayed on
the desktop. It enhances ondesktop options for SessionCong=ICA so
that the VDI brokers can work with ondesktop options too.
• If AutoConnectList is set in the VDIServer statement, all connections
congured in AutoConnectList parameter are displayed.
• The connections show on desktop as default.
• The connections can be controlled by using the values available.
• The connection is added to the connection manage list even if the
connection is not displayed on the desktop.
all - show all, same as default none - don't show any desktops - only show
desktops applications - only show applications The others will be handled
as a ondesktop_list. For example, if set ondesktop="word; excel", only
show the applications "word" and "excel".
all—display all connections.
none—no connections are displayed.
desktops—display only the desktop connections.
applications — display only applications, the connections are handled as
an ondesktop_list. For example, if you set ondesktop=word; excel, then
only the applications word and excel are displayed.
The ondesktop_list also supports wildcard when the star * is used, similar
to the AutoConnectList parameter in VDIServer. For example, if the value
Creating and Using xen.ini Files
219