Administrator Guide

Parameter Description
DisableChangeDateTime—If the option DisableChangeDateTime is set,
the function of changing the date and time locally is disabled. For
example, when you right-click the time label in taskbar, nothing is
displayed. The Change Date and Time button in System Prefernce is
invisible.
NOTE:
If the optional EnableNetworkSetup=yes is set with
Privilege={none, low}, the network setup will be enabled.
If the optional DisableNetworkOptions=yes is set at the same time,
the Options table will be disabled.
If the optional EnableSystemPreferences=yes is set with
Privilege={none, low}, the system preferences setup will be
enabled.
If the optional DisableTerminalName=yes is set at the same time,
the terminal name eld will be disabled.
If the optional DisableSerial=yes is set with Privilege={none, low},
the serial table in peripherals setup will be enabled.
If the optional EnablePeripherals= is set with Privilege=none, the specied
peripherals tab will be enabled. The value of the option can be a list of any
valid value separated with "," or ";". For Camera, Touchscreen and
Bluetooth, they can be enabled only if the devices are available. For
example, Privilege=none lockdown=yes
EnablePeripherals=mouse,audio,camera,bluetooth, then mouse and audio
tab will be enabled, if there are camera and/or bluetooth devices, the
camera and/or bluetooth tab will be enabled too. The optional
EnableKeyboardMouseSettings=yes can be replaced as
below:Privilege=none lockdown=yes EnablePeripherals=keyboard,mouse.
FastDHCP— FastDHCP identies the gateway rst. If the gateway is
same as the network before disconnection and the previous DHCP
information is valid, the same information is used. The default value is yes.
TCPTosDscp—Use this option to set the TOS eld of all TCP packets
when the elds are not pre-congured by other INI settings.
UDPTosDscp—Use this option to set the TOS eld of all UDP packets
when the elds are not pre-congured by other INI settings.Added new
sheet TOS_Priority_settings for TosDSCP INI, which is merged from
TOS_Priority_settings.docx.
HideWlanScan—Use this option to disable WIFI scan in lockdown mode.
The default value is no.
Proxy={yes,
no}
AppList={ccm;fr;rtme;wms}
[Type={Global, http, https, socks5}]
[Server=_host_port_]
[User=_user_name]
[Password=_password_]
[Encrypt={yes, no}]
Species the proxy settings which are saved in non-volatile memory. If
Proxy=no, all proxy settings are cleared and all the followed options are
ignored.
If Proxy=yes, the option AppList must be followed. It species which
applications are applied to connect through proxy. WMS, CCM, FR, and
RTME are supported. The application name is separated with semicolon.
NOTE: Wyse Management Suite is the successor to Cloud
Client Manager (CCM).
The following options are used to congure one or several proxy server
setting. The option Type species the proxy protocol including http, https
and socks5. The option Server species the url of the proxy server. The
Creating and Using xen.ini Files 211