Administrator Guide

Parameter Description
If you set Combined=yes, the DNS server will combine the DNS server
congured by DHCP and the static one. The DNS domain will use the
value congured by DHCP in case the static DNS domain is empty.
DomainList=<List of NT domain names>
[disable={yes/no}]
A list of domain names that will appear in the Log on dialog box as options
to help users in selecting the domain to sign-on to PNAgent/ PNLite
servers. Once specied, it is saved in non-volatile memory.
NOTE: Be sure to enclose in quotation marks if spaces are
included.
For example: DomainList=”North_America, SQA, test-domain”
disable— If the value is set to yes, the domain eld in sign-on window is
disabled.
Dualhead={no, yes}
[ManualOverride={yes, no}]
[Mainscreen={1, 2}]
[Orientation={hort, vert}]
[Align={Top, Center, Bottom}]
[MonitorAutoDetect={yes,no}]
[EnsureDpIsOn ={yes, no}]
Default is no.
Dualhead — Yes/no option to support a dual-monitor display.
CAUTION: If Dualhead is changed to yes, your zero client will
require a reboot to change the monitor display.
ManualOverride — Yes/no option to have all the parameters only valid in
factory default. It is helpful to congure the display setting manually if
both single monitor and dual monitor exist in an environment.
Mainscreen — Sets which screen is used as the main screen.
NOTE: When using a DVI to DVI and VGA cable, the DVI
connected monitor will be the default mainscreen=1 in a dual-
monitor conguration. When using a zero client with a DP and
DVI ports, the DP is Screen 1 and DVI is Screen 2.
Orientation — Default is hort. Sets which style is used for display.
NOTE: hort means horizontal and vert means vertical.
Align — Sets how screens are aligned:
• Top means screens are top aligned in "hort" orientation.
• Center means screens are center aligned.
• Bottom means screens are bottom aligned in "hort" orientation.
MonitorAutoDetect — Determines whether or not the system will detect
how many monitors are connected. If only one monitor is connected,
Span mode will be transfered to Mirror mode.
The optional keyword EnsureDpIsOn is only used for D-class. When
EnsureDpIsOn is set to yes, D-class will halt at boot time until DP monitor
is plugged in.
FileServer=<List of IP address or DNS name>
[Username=<username>]
[Password=<password>]
[SecurityMode= {Low, Warning, Full, Default}]
[Username-Enc={encrypted_password_string}]
[Password-Enc={encrypted_password_string}]
FileServer — Species the FTP or Web (http://) server IP address or
DNS name that is entered into the zero client local setup (non-volatile
memory); your zero client immediately uses this server to access les.
Username — Species the username of the le server.
Password — Species the password of the le server.
NOTE: The target le server must support access using the
same user credentials used in the INI les.
Creating and Using xen.ini Files 191