Administrator Guide

Figure 6. Management conguration

• File Server—Enter the le server details to apply congurations including INI les from a le server.

• WMS—Enter the group registration key and the Wyse Management Suite server URL to register the zero client to the Wyse

Management Suite.

• WDM—Enter the IP addresses or host names.

• Disable SSL warning—Select this check box to disable the SSL (Secure Sockets Layer) connection warnings.

• Certicates Manager—Click Certicates Manager to import or request a certicate.

NOTE

: To exit the Management Conguration screen, and load the ThinOS Lite system desktop, click

Exit.

7 Click Done to exit First Boot Wizard or click Next to enter the Connection Broker Conguration setup.

8 On the Connection Broker Conguration screen, congure the Citrix broker connection. The broker allows you to connect to full

desktops using Citrix Virtual Apps and Desktops (formerly XenDesktop) or individual applications using Citrix Virtual Apps (formerly

XenApp) from a centralized host through Citrix Receiver Client.

• Server Address—Enter the host name or IP address of the broker connection.

• Enable theme: ThinOS Lite—Select this check box to boot the zero client in ThinOS Lite mode.

• StoreFront style—Select this check box to enable the Citrix StoreFront based layout of published applications and desktops on

the zero client.

• Certicates Manager—Click Certicates Manager to import or request a certicate.

• Disable SSL warning—Select this check box to disable the warnings for your SSL (Secure Sockets Layer) connection.

9 Click Done.

NOTE

: To congure the Management Conguration setup again, click Back, and follow the steps 6 and

The device exists from First Boot Wizard mode, and the ThinOS Lite desktop is displayed.

Getting started