Administrator Guide

NOTE:
Ping sends an echo request to a network host. The host parameter is either a valid host name or an IP address. If the host is
operational and on the network, it responds to the echo request. Ping sends one echo request per second and calculates
round trip times and packet loss statistics. It displays a brief summary upon completion of the calculation.
The ping utility can be used to:
• Determine the status of the network and various foreign hosts.
• Track and isolate hardware and software problems.
• Test, measure, and manage networks.
• Determine the IP address of a host if only the host name is known.
IMPORTANT:
Not all network equipment will respond to ping packets, as this is a common mechanism used in denial-of-service attacks.
Lack of response does not necessarily indicate that the target of the ping is unusable for other purposes.
6
Click the Trace Route tab to execute the tracert diagnostic utility and display response messages. Use the following guidelines:
164 Performing Diagnostics