Administrator Guide
Figure 119. Printer setup—Ports
2 Click the Ports tab and use the following guidelines:
a Select Port—Select the port you want from the list. LPT1 or LPT2 selects the connection to a direct-connected USB printer.
b Printer Name — (Required) Enter name you want displayed in your list of printers.
most USB direct-connected printers report/ll in their printer name automatically.
NOTE
: If Enable LPD service for the printer is selected, the printer name becomes the queue name for other
clients using LPR to print to this printer.
c Printer Identication — Enter the type or model of the printer in the exact text of the Windows printer driver name—including
capitalizations and spaces, most USB direct-connected printers report/ll in their printer identications automatically.
This entry must be either the device driver name for the printer under the Microsoft Windows system, or a key to map to the
device driver. If not specied, the name will be defaulted to the printer-supplied identication for standard direct-connected USB
printers or Generic / Text Only for non-USB connected printers upon connection to Windows hosts. The driver name mapping
takes place either through a printer-mapping le read by the system as part of the global prole (wnos.ini) or by MetaFrame
servers through the MetaFrame printer conguration le (\winnt\system32\wtsprnt.inf).
NOTE
: The maximum characters of printer Identication led is 31. If your printer driver string is more than
31 characters (Include space). Please create a txt le called "printer.txt", and input content like "HP Color" =
"HP Color LaserJet CM1312 MFP PCL6 Class Driver"
Then add below command line in your wnos.ini le:
printermap=printer.txt
Then you just enter "HP Color" in Printer Identication led instead of the full driver string.
d Printer Class- (Optional) Select the printer class from the list PCL5, PS, or TXT or PCL4.
e Enable the printer device - Must be selected to enable the directly-connected printer. It enables the device so it displays on the
remote host.
f Enable LPD service for the printer - Select this to make the zero client an LPD (Line Printer Daemon) network print server for
LPR printing requests from the network.
136
Conguring Zero Client Settings