Administrator Guide
Figure 118. Peripherals—Bluetooth
c Scan— All Bluetooth devices enter into Page Scan mode. Dierent Bluetooth devices enter into the Page Scan mode at
dierent instances such as when a specic button is pressed three times or a specic button is pressed and held until the LED
turns blue.
NOTE
:
Auto Connect function—The Auto Connect function is designed for HID devices.
Prerequisites:
• ThinOS Lite has no HID devices connected such as USB or Bluetooth HIDs.
• The Bluetooth HID devices are congured as Page Scan mode.
When you start the ThinOS Lite client, the Bluetooth HIDs can connect to ThinOS Lite automatically without
scanning or pairing operations. The HID Bluetooth devices automatically reconnect upon ThinOS Lite reboot.
Reconnect function—The Reconnect function is designed for HIDs and headsets
When you restart the system with the Bluetooth device already paired and connected, the Bluetooth device
automatically reconnects in a few seconds. For example, you can hover the Bluetooth mouse, and then click a
few times, for the Bluetooth device to reconnect successfully. The Bluetooth headset reconnects automatically,
but might require you to manually close or reopen the device on certain occasions.
To know about the certied devices, refer the latest Dell Wyse ThinOS Lite release notes.
Known Issues of the Bluetooth feature
1 If more than two Bluetooth mouse devices are connected to ThinOS Lite along with two other Bluetooth devices, it may cause low
performance of Bluetooth connectivity.
Workaround: Dell recommends using one mouse and one keyboard in ThinOS Lite with Bluetooth connection.
134
Conguring Zero Client Settings