Administrator Guide
Figure 111. Display—Dual Head
e Swap dual screens—When you set Main Screen to Screen2, an additional check box is displayed at the bottom of the tab
oering to swap dual screens; If the check box is cleared, the Screen1 is usually the left one or the top one in dual display. When
you set Main Screen to Screen2 the main screen will be changed to the right screen or bottom screen; If the check box swap
dual screens is selected, you are able to set Main Screen to Screen2 but still have it at the left side or the top side, which is
considered more user friendly.
Changing display settings dynamically
From ThinOS Lite 2.4 release, after you change the display settings, the changes will take eect immediately without a system restart.
Single Mode user scenario
Go to System Setup > Display > General and do the following:
1 Change resolution from DDC table or User dened display settings.
2 Change rotation setting from User dened display settings.
Conguring
Zero Client Settings 125