Administrator Guide
• Lock Terminal, Unlock Password
• Terminal is locked, Invalid unlock password
d Terminal Name — Allows entry of a name for the zero client. The default is a 14-character string composed of the letters WT
followed by the zero client Ethernet MAC address.
Some DHCP servers use this value to identify the IP address lease in the DHCP Manager display.
3 Click OK to save the settings.
Setting the Time and Date
To congure the Time and Date settings:
1 From the oating bar menu, click the System Setup , and then click System Preferences.
The System Preference dialog box is displayed.
Figure 107. Time and Date
2 Click the Time/Date tab and use the following guidelines:
a Time Zone— Select a time zone where the zero client operates from the drop-down list. Default is Unspecied.
b Enable Daylight Saving— Allows you to enable the daylight saving settings. When selected, the Start Date and End Date boxes
must be properly congured to dene the daylight saving starting (month/week/day) and ending (month/week/day) periods.
Use the following guidelines to enter the Start Date and End Date:
• Month— Species the month in the year from January through December.
• Week— Select 1 through 4 for the week in the month. Week last denotes the last week in the month.
• Day — Species the day of the week from Monday through Sunday.
c Time Format — Allows you to select a 12 or 24-hour time format. Default is 24-hour format.
d Date Format — Allows you to select a yyyy/mm/dd (year/month/day) or dd/mm/yyyy (day/month/year) date format. Default
is yyyy/mm/dd.
e Time Servers — List of IP addresses or host names with optional TCP port number of Time Servers.
120
Conguring Zero Client Settings