Owner's Manual

Configuring the Device Settings
You can configure your mobile broadband card to automatically connect to the network when you power up your system or
manually connect and disconnect using the Connect/Disconnect button in the main window.
Option Description
Connection Mode Select your mobile broadband card.
Manual Connect Select this option if you want to manually connect and disconnect from the network.
Auto-Connect At
Startup
Select this option if you want to auto-connect at startup using
NDIS. If you choose this option, the
card will be up, running, and connected by the time you log into Windows.
To configure the connection settings:
1. In the Main window, select Configuration from the Edit menu.
2. In the Configuration dialog box, click the Device Setting tab, and set any of the following:
In the Connection Mode drop-down list, select your mobile broadband card.
Select a connection mode option: Manual Connect to manually control the connection, or Auto-Connect At Startup
to connect automatically at startup using
NDIS.
3. To close the dialog box and save your settings, click OK.
NOTE: If you choose Auto-Connect At Startup mode, you will always be connected when you start your computer provided
you are in a data service coverage area.
Top of Page
Additional Features