Owner's Manual

Configuring the Device Settings
You can configure your mobile broadband card to automatically connect to the network when you power up your system or
manually connect and disconnect using the Connect/Disconnect button in the main window. You can also require a PIN code to
unlock your mobile broadband card on startup.
Connection Mode
Option Description
Connection Mode Select your mobile broadband card.
Manual Connect Select this option if you want to manually connect and disconnect from the network.
Auto-Connect At
Startup
Select this option if you want to auto-connect at startup using
NDIS. If you choose this option, the
card will be up, running, and connected by the time you log into Windows.
Lock Code
Option Description
Auto-Lock On Power
Up
Set this option to require a PIN code to unlock your mobile broadband card when you start up.
Pin Code If you select the Auto-Lock On Power Up option, enter the PIN code in this text box that will be
required to unlock your mobile broadband card. If you unlock your mobile broadband card using the
PUK code provided by your service provider, the PIN code is automatically set to "0000".
Change Pin Code... Click this button to open the Change Pin Code dialog box and change your PIN code.
Advanced
Option Description
Manual Network Click this button to open the Manual Network selection dialog box and choose a network.