Owner's Manual

and again in the Confirm password box.
-or-
• Select the Prompt for user name and password check box.
-or-
• Select the Use Windows user name and password check box.
7. Click OK.
8. On the Wireless Networks tab of the utility, click either Apply or OK.
Ad Hoc Host/Client
If you are creating a host ad hoc network for other wireless clients to connect to, you can configure the network to either use
WEP security or no security. If you configure the network to use WEP security, you must provide the network key to the other
wireless clients. If you configure the network to use no security, anyone within range will be able to connect to the network.
If you are creating a profile for connecting to an ad hoc network, you must know the network name. If the ad hoc network
uses WEP security, you also must know the network key and include it in your profile.
1. In Wireless Network Connections Settings, type the name of the network you want to create or connect
to in the Network name box.
2. Select the This is an ad hoc network check box.
3. If you are creating a network, select the channel on which you want your network to operate. If you want to
operate your ad hoc network on a 40 MHz bandwidth channel, select the 40 MHz Bandwidth check box.