Owner's Manual

NOTE: If your network is a broadcasting network, you can click Select to find the network name.
NOTE: If you selected GTC, skip to step 6.
11. On the Wireless Networks tab of the utility, click either Apply or OK.
802.1X, WPA-Enterprise, or CCKM Client with EAP-FAST EAP and GTC or MS-CHAPv2
Inner EAP Authentication
This type of network connection requires a user name and password. If you opt to use authenticated provisioning, a client
certificate must also be supplied when provisioning a PAC. For a description of the encryption and authentication methods
used with this type of network, see
Available Advanced Network Authentication Protocols.
1. In Wireless Network Connections Settings, type the network name in the Network name box.
2. If you want the profile to be temporary, in the Remove after list, select the period of time you want the
profile to be available.
-or-
• If you want the profile to be permanent, select Never.
3. As appropriate for your network, select either 802.1X, WPA-Enterprise, or CCKM in the Network
authentication list.
4. Select EAP-FAST in the EAP method list, and then, as appropriate for your network, select either GTC or
MS-CHAPv2 in the Inner EAP method list.
5. On the User Name/Password tab, type your user name in the Domain/User Name box, and then type
your password in the Password box and again in the Confirm password box.