Owner's Manual

NOTE: If you click GTC, skip to step 7.
• If you want the profile to be permanent, select Never.
3. As appropriate for your network, select either 802.1X, WPA-Enterprise, or CCKM in the Network
authentication list.
4. Select PEAP in the EAP method list, and then, as appropriate for your network, select either MS-CHAPv2
or GTC in the Inner EAP method list.
5. Click the User Name/Password tab.
6. Type your user name in the Domain/User Name box and then type your password in the Password box
and again in the Confirm Password box.
-or-
• Select the Prompt for user name and password check box.
-or-
• Select the Use Windows user name and password check box.
7. In Wireless Network Connection Settings, click OK.
8. On the Wireless Networks tab of the utility, click either Apply or OK.
802.1X, WPA-Enterprise, or CCKM Client with PEAP EAP and TLS Inner EAP
Authentication