Owner's Manual

Back to Contents Page
Setting Advanced Properties: DW WLAN Card User Guide
802.11h+d Disable Upon Wired Connect Minimum Power
Consumption
SSID Autopromote
Afterburner Fragmentation Threshold PLCP Header VLAN Priority Support
Antenna Diversity IBSS 54g Protection Mode Power Save Mode Wake-Up Mode
AP Compatibility
Mode
IBSS Allowed Radio Enable/Disable WMM
Band Preference IBSS Mode Rate (802.11a) WZC IBSS Channel
Number
Bandwidth Capability Locally Administered MAC
Address
Rate (802.11b/g) WZC Managed Ethernet
Bluetooth
Collaboration
Location Roaming Decision Xpress Technology
BSS Mode Lock Wireless Settings Roam Tendency
Disable Bands Manage Wireless Settings RTS Threshold
To view or change the settings of the advanced properties of your DW WLAN Card:
1. Click the Start button, and then click Control Panel.
2. In Control Panel Category View, click Network and Internet Connections.
3. In Network and Internet Connections under or pick a Control Panel icon, click Network Connections.
4. In Network Connections, right-click Wireless Network Connection, and then click Properties.
5. In Wireless Network Connection Properties on the General tab, click Configure.
6. In DW WLAN Card Properties, click the Advanced tab.
7. On the Advanced tab in the Property list, click the name of the property for which you want to view or
change the setting. The default setting is shown in the Value list.
8. To change the setting, select a different value in the list or type a new value, as appropriate.