Owner's Manual

NOTE: If your network is a broadcasting network, you can click Select to find the network name.
5. On the User Name/Password tab, type your user name in the Domain/User Name box, and then type
your password in the Password box and again in the Confirm password box.
-or-
• Select the Prompt for user name and password check box.
-or-
• Select the Use Windows user name and password check box.
6. Click OK.
7. On the Wireless Networks tab of the utility, click either Apply or OK.
802.1X, WPA-Enterprise, or CCKM Client with PEAP EAP and MS-CHAPv2 or GTC Inner
EAP Authentication
This type of network connection requires a user name and password. For a description of the encryption and authentication
methods used with this type of network, see
Available Advanced Network Authentication Protocols.
1. In Wireless Network Connection Settings, type the network name in the Network name box.
2. If you want the profile to be temporary, in the Remove after list, select the period of time you want the
profile to be available.
-or-