Owner's Manual

NOTE: If your network is a broadcasting network, you can click Select to find the network name.
• As appropriate for your network, in Certificate Selector in the Show certificate type list, select the type of
certificate (intermediate certificates or root certificates) you want to use, click the specific certificate you want to use,
and then click OK.
10. Click OK.
11. On the Wireless Networks tab of the utility, click either Apply or OK.
802.1X, WPA-Enterprise, or CCKM Client with LEAP EAP Authentication
This type of network connection requires a user name and password. For a description of the encryption and authentication
methods used with this type of network, see
Available Advanced Network Authentication Protocols.
1. In Wireless Network Connection Settings, type the network name in the Network name box.
2. If you want the profile to be temporary, in the Remove after list, select the period of time you want the
profile to be available.
-or-
• If you want the profile to be permanent, select Never.
3. As appropriate for your network, select either 802.1X, WPA-Enterprise, or CCKM in the Network
authentication list.
4. Select LEAP in the EAP method list.