Owner's Manual

NOTE: If your network is a broadcasting network, you can click Select to find the network name.
logon check
box. This
setting will
not take
effect until
you next
reboot the
computer. Do
not select the
check box,
however,
unless
Authenticate
prior to
logon is
needed for
your network.
Check with
your network
administrator
for
assistance.
• In the Remove after list, you can designate a profile to be either temporary or permanent by selecting the period
of time you want the profile to be available.
802.1X Client with MD5 EAP Authentication
This type of network connection uses a network key and requires a user name and password. For a description of the
encryption and authentication methods used with this type of network, see
Available Advanced Network Authentication
Protocols.
1. In Wireless Connection Settings, type the network name in the Network name box.
2. If you want the profile to be temporary, in the Remove after list, select the period of time you want the
profile to be available.
-or-
• If you want the profile to be permanent, select Never.
3. Select 802.1X in the Network authentication list.
4. Select MD5 in the EAP method list.
5. On the Network Key tab, type the network key in the Network key box and again in the Confirm
network key box.
6. Click the User Name/Password tab.