Owner's Manual

NOTE: For WEP encryption, you must clear the The key is provided for me automatically check box before you type
the network key.
NOTE: For WEP encryption, the network key must be either exactly five or exactly 13 characters long, or exactly 10 or
exactly 26 characters long using the numbers 0-9 and the letters a-f (letters can be uppercase or lowercase). For TKIP or
AES encryption, the network key must be from eight to 26 characters long or 64 characters long using the numbers 0-9
and the letters a-f (letters can be uppercase or lowercase). The network key must exactly match the network key of the
access point (AP) or ad hoc network.
NOTE: If the connection profile you are creating is for an ad hoc network, select the This is a computer-to-computer
(ad hoc) network: wireless access points are not used check box before clicking OK.
• Type the network name in the Network name (SSID) box.
• As appropriate for your network, select either Open or WPA-PSK in the Network Authentication list.
• For open authentication, select WEP in the Data encryption list.
-or-
• As appropriate for your network, for WPA-PSK authentication, select either TKIP or AES in the Data encryption list.
• Type the network key in the Network key box and again in the Confirm network key box.
• Click OK.