Owner's Manual

NOTE: If the Wireless Networks tab is not available, open DW WLAN Card Utility, clear the Let this tool manage
your wireless networks check box, click OK, and start over (for instructions on opening the utility, see
Performing
Network Tasks Using DW WLAN Card Utility).
NOTE:
1. Open Network Connections in Control Panel (Classic View).
2. Right-click Wireless Network Connection, and then click Properties. On the Wireless Networks tab,
verify that the Use Windows to configure my wireless network settings check box is selected. If it is
not, click to select the check box.
3. Click Add.
4. In Wireless network properties on the Association tab:
• Type the network name in the Network name (SSID) box.
• Select Open in the Network Authentication list.
• Select Disabled in the Data encryption list.
• Click OK.
• To
automatically
connect to
your network
when it is in
range, select
the Connect
when this
network is
in range
check box on
the
Connection
tab.
• If the connection profile you are creating is for an ad hoc network, select the This is a computer-to-computer
(ad hoc) network: wireless access points are not used check box before clicking OK.