Owner's Manual

ManualsBrandsDell ManualsSoftwareDell Windows Debugger Utility Version 1.0

Table Of Contents

Local Disk
- T:\htdocs\SOFTWARE\smdrac3\dwdu\dwdu10\readme\readme.txt

file:///T|/htdocs/SOFTWARE/smdrac3/dwdu/dwdu10/readme/readme.txt[11/1/2012 7:46:29 AM]

#####################################################################

DELL(TM) Windows(R) Debugger Utility 1.0 README

#####################################################################

Version 1.0

Release Date: February 2010

NOTE: This readme provides information for Dell Windows Debugger Utility 1.0.

#####################################################################

TABLE OF CONTENTS

#####################################################################

This file contains the following sections:

* Overview

* Criticality

* Minimum Requirements

* Installation

* Known Issues

#####################################################################

Overview

#####################################################################

The Dell(TM) Windows(R) Debugger Utility (DWDU) allows you to remotely debug

the Windows kernel, and monitor Windows boot sequence, on the server through

the Dell Remote Access Controller (DRAC). To do debugging, the DWDU launches

tools like Windows debugger (WinDbg) or KD to perform remote debugging.

#####################################################################

CRITICALITY

#####################################################################

2 - Recommended

#####################################################################

MINIMUM REQUIREMENTS

#####################################################################

You can install DWDU on both 32-bit and 64-bit Microsoft(R) Windows(R) operating

systems.

DWDU supports the following types of RACs that support IPMItool SOL connection:

Summary of content (5 pages)

PAGE 1
##################################################################### DELL(TM) Windows(R) Debugger Utility 1.0 README ##################################################################### Version 1.0 Release Date: February 2010 NOTE: This readme provides information for Dell Windows Debugger Utility 1.0.
PAGE 2
• Dell Remote Access Controller 5 (DRAC 5) • Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise for blade servers • Integrated Dell Remote Access Controller 6 (iDRAC6) Enterprise for rack and tower servers Microsoft .NET 2.0 SP1 or higher versions with latest updates is required for the DWDU application to work correctly. WinDbg/KD kernel debuggers from Microsoft website. Null-modem emulator from the SourceForge website.
PAGE 3
Installing New Hardware and Adding Emulator Pair To install the new hardware: 1. On the Found New Hardware Wizard, click ‘Next’ to install the drivers for the default port. 2. Click ‘Finish’. 3. Repeat the steps 1 and 2 to install the other default port. NOTE: For more information, see Null-modem Emulator readme. To add CNCA1 and COM8 pair: 1. Open the Null-modem emulator. 2. Click ‘Add Pair’ and change the port names to CNCA1 and COM8. 3. Click ‘Apply’ and close the Null-modem Emulator. 4.
PAGE 4
Baud rate : 115200 COM port : COM2 for all rack and tower servers and COM1 for blade servers Enabling Serial Over LAN and IPMI Over LAN in DRAC/iDRAC You must enable Serial Over LAN and IPMI Over LAN in DRAC/iDRAC configuration. For more information, see the following documents available on the Dell Support website at support.dell.
PAGE 5
February 2010 file:///T|/htdocs/SOFTWARE/smdrac3/dwdu/dwdu10/readme/readme.