Owner`s manual

78 Setting Up Your Wide LCD Monitor
www.dell.com | support.dell.com
Using the VGA Connector
NOTE: Only one connector can be used for a computer, either VGA or DVI.
1
Turn off the wide LCD monitor and unplug the power cord.
2 Connect the blue VGA cable to your wide LCD monitor and to your computer.
3 Connect the green audio cable to the connector on the wide LCD monitor and to your
computer.
4 Plug in the power cords for the wide LCD monitor and computer and turn them on.
5 Enter the TV Menu and select the VGA . For additional information about the Input Select
menu, see page 85.
Using the D4 Connector
1 Turn off the wide LCD monitor and unplug the power cord.
2 Connect your device including the audio cables.
3 Plug in the power cords for the wide LCD monitor and device and turn them on.
4 Enter the TV Menu and select the or AV2 (D4) . See page 85.