Reference Guide
8
2.1.1.1 Dimensions/Weight
The AP has the following physical dimensions:
4.9” x 5.13” x 2.0” (124mm x 130mm x 51mm)
15oz (0.42 Kgs)
2.1.1.2 Interfaces
The module provides the following network interfaces:
2 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna (model Aruba AP-124 only)
o 3 x RP-SMA antenna interfaces (supports up to 3x3 MIMO with spatial diversity)
1 x RJ-45 console interface
The module provides the following power interfaces:
48V DC 802.3af or 802.3at or PoE + interoperable Power-over-Ethernet (PoE) with intelli-source
PSE sourcing intelligence
5V DC for external AC supplied power (adapter sold separately)
2.1.1.3 Indicator LEDs
There are 5 bicolor (power, ENET 0, 1, and WLAN) LEDs which operate as follows:
Table 1- Indicator LEDs
Label
Function
Action
Status
PWR
AP power / ready status
Off
No power to AP
Red
Power applied, bootloader starting
Flashing - Green
Device booting, not ready
On - Green
Device ready
ENET 0
Ethernet Network Link
Status / Activity
Off
Ethernet link unavailable
On - Amber
10/100Mbs Ethernet link negotiated
On - Green
1000Mbs Ethernet link negotiated
Flashing
Ethernet link activity
ENET 1
(Dual radio
only)
Ethernet Network Link
Status / Activity
Off
Ethernet link unavailable
On - Amber
10/100Mbs Ethernet link negotiated
On - Green
1000Mbs Ethernet link negotiated
Flashing
Ethernet link activity
WLAN 2.4Ghz
2.4GHz Radio Status
Off
2.4GHz radio disabled
On - Amber
2.4GHz radio enabled in WLAN mode
On – Green
2.4GHz radio enabled in 802.11n mode