Reference Guide

22
3.3 Operational Environment
This section does not apply as the operational environment is non-modifiable.
3.4 Logical Interfaces
The physical interfaces are divided into logical interfaces defined by FIPS 140-2 as described in the
following table.
Table 8 - Logical Interfaces
FIPS 140-2 Logical Interface Module Physical Interface
Data Input Interface

10/100 Base-T Ethernet ports (RAP-3WN/RAP-
3WNP)
 10/100/1000 Ethernet Ports
(RAP108/109/114/115)
 802.11a/b/g/n Antenna Interfaces
 USB 2.0 port
Data Output Interface

10/100 Base-T Ethernet ports (RAP-3WN/RAP-
3WNP)
 10/100/1000 Ethernet Ports
(RAP108/109/114/115)
 802.11a/b/g/n Antenna Interfaces
 USB 2.0 port
Control Input Interface

10/100 Base-T Ethernet ports (RAP-3WN/RAP-
3WNP)
 10/100/1000 Ethernet Ports
(RAP108/109/114/115)
 802.11a/b/g/n Antenna Interfaces
 Reset button
Status Output Interface

10/100 Base-T Ethernet ports (RAP-3WN/RAP-
3WNP)
 10/100/1000 Ethernet Ports (RAP-108/109 and
AP-114/115)
 802.11a/b/g/n Antenna Interfaces
 LEDs
Power Interface

Power Supply
 Power-over-Ethernet (POE) (RAP-108/109 and
AP-114/115)