Reference Guide

20
3.2.4 AP-114/115 TEL Placement
This section displays all the TEL locations of the Aruba AP-114 and AP-115. The AP-114/115 requires a
minimum of 3 TELs to be applied as follows:
3.2.4.1 To detect opening of the chassis cover:
1. Spanning the top and bottom chassis covers across the left side of the chassis
2. Spanning the top and bottom chassis covers across the right side of the chassis
3.2.4.2 To detect access to restricted ports
3. Covering the RJ-45 console connector.
Following is the TEL placement for the AP-114 and AP-115:
Figure 5 - AP-114/115 Top View