Reference Guide

19
3.2.3 RAP-108/109 TEL Placement
This section displays all the TEL locations of the Aruba RAP-108 and RAP-109. The RAP-108/109
requires a minimum of 3 TELs to be applied as follows:
3.2.3.1 To detect opening of the chassis cover:
1. Spanning the left and right chassis covers across the top of the chassis
2. Spanning the left and right chassis covers across the bottom of the chassis
3.2.3.2 To detect opening of the chassis cover and access to restricted ports
3. Spanning the left and right chassis covers and covering the RJ-45 console connector.
Following is the TEL placement for the RAP-108 and RAP-109:
Figure 3 - RAP-108/109 TEL Placement – Top View
Figure 4 - RAP-108/109 TEL Placement - Side View