Reference Guide

14|
Aruba 7200 Series Controllers FIPS 140-2 Level 2 Security Policy
User Role
The User role can access the controller’s IPSec and IKEv1/IKEv2 services. Service descriptions and
inputs/outputs are listed in the following table:
Table 4 User Service
Service Description Input Output CSP Access
IKEv1/IKEv2-
IPSec
Access the module's IPSec
services in order to secure
network traffic
IPSec inputs,
commands, and data
IPSec outputs,
status, and data
29, 30, 31, 32 (read)
8, 9, 10, 11, 12, 13
(read/write)
17 (read)
18, 19, 20, 21, 22, 23
(read/write)
HTTPS over
TLS
Access the module’s TLS
services in order to secure
network traffic
TLS inputs,
commands, and data
TLS outputs,
status, and data
29, 30, 31, 32 (read)
26, 27, 28 (read/write)
EAP-TLS
termination
Provide EAP-TLS
termination
EAP-TLS inputs,
commands and data
EAP-TLS outputs,
status and data
29, 30, 31, 32 (read)
26, 27, 28 (read/write)
802.11i Shared
Key Mode
Access the module’s
802.11i services in order to
secure network traffic
802.11i inputs,
commands and data
802.11i outputs,
status and data
33 (read)
35 (read/write)
802.11i with
EAP-TLS
Access the module’s
802.11i services in order to
secure network traffic
802.11i inputs,
commands and data
802.11i outputs,
status, and data
29, 30, 31, 32 (read)
34, 35 (read/write)
Self-Tests
Run Power-On Self-Tests
and Conditional Tests
None
Error messages
logged if a failure
occurs
None