Reference Guide

17
4.2.3 Wireless Client Services
The following module services are provided for the Wireless Client role in each of FIPS approved modes
defined in section 3.3.
Table 11 - Wireless Client Services
Service Description CSPs Accessed (see section 6
below for complete description of
CSPs)
Generation and use of 802.11i
cryptographic keys
In all modes, the links between
the module and wireless client are
secured with 802.11i.
26, 27, 28, 29, 30, 31 (read/write)
Use of WPA pre-shared key for
establishment of IEEE 802.11i
keys
When the module is in advanced
Remote AP configuration, the
links between the module and the
wireless client are secured with
802.11i. This is authenticated
with a shared secret only.
25 (read)
Wireless bridging services The module bridges traffic
between the wireless client and
the wired network.
None
4.2.4 Unauthenticated Services
The module provides the following unauthenticated services, which are available regardless of role.
 System status – module LEDs
 Reboot module by removing/replacing power
 Self-test and initialization at power-on.