Reference Guide

 Allow 24 hours for the TEL adhesive seal to completely cure.

 Record the position and serial number of each applied TEL in a security log.

Once applied, the TELs included with the AP cannot be surreptitiously broken, removed or reapplied

without an obvious change in appearance:

Each TEL has a unique serial number to prevent replacement with similar label. To protect the device from

tampering, TELs should be applied by the Crypto Officer as pictured below:

3.2.2 AP-224/225 TEL Placement

This section displays all the TEL locations of the Aruba AP-224/225. The AP-224/225 requires a

minimum of 4 TELs to be applied as follows:

3.2.2.1 To detect opening of the chassis cover:

 Spanning the bottom and top chassis covers and placed on the left, right, and bottom of the unit

3.2.2.2 To detect access to restricted ports

 Spanning the serial port

Following is the TEL placement for the AP-224/225:

Figure 1: AP-224/225 Front/Top view