Reference Guide

16|
Aruba 600 Series Controllers FIPS 140-2 Level 2 Security Policy
Table5‐Crypto-Officer Services
Configuring
Module Platform
Define the platform subsystem
firmware of the module by
entering Bootrom Monitor Mode,
File System, fault report,
message logging, and other
platform related commands
Commands and
configuration data
Status of
commands and
configuration data
None
Configuring
Hardware
Controllers
Define synchronization features
for module
Commands and
configuration data
Status of
commands and
configuration data
None
Configuring
Internet Protocol
Set IP functionality
Commands and
configuration data
Status of
commands and
configuration data
None
Configuring
Quality of Service
(QoS)
Configure QOS values for module
Commands and
configuration data
Status of
commands and
configuration data
None
Configuring VPN
Configure Public Key
Infrastructure (PKI); configure the
Internet Key Exchange
(IKEv1/IKEv2) Security Protocol;
configure the IPSec protocol
Commands and
configuration data
Status of
commands and
configuration data
19 (read/write)
Configuring DHCP Configure DHCP on module
Commands and
configuration data
Status of
commands and
configuration data
None
Configuring
Security
Define security features for
module, including Access List,
Authentication, Authorization and
Accounting (AAA), and firewall
functionality
Commands and
configuration data
Status of
commands and
configuration data
14, 15, 16
(read/write)
Manage
Certificates
Install, rename, and delete X.509
certificates
Commands and
configuration data;
Certificates and keys
Status of
certificates,
commands, and
configuration
29, 30, 31, 32
(read/write)